● Create design and place your setting to mirror in your design space.
○ Tip: By mirroring your design you are flipping the placement so when you place the design down it is right side up.

• ●  Place the colored shiny side down on your mat. Dull side (no color) is facing up during cutting.

• ●  Cut design and weed vinyl.

• ●  Place the item on the heat press and put your vinyl design in the area you want to press.

• ●  Place a cover sheet (Teflon paper or Parchment paper) over your design and press with medium pressure at 300°F – 315°F for 15 seconds.

• ●  Open press, allow design to cool and cold peel application sheet in 1 pull for best results

• ●  Tip for Matte vinyl – Great option for layering / stacking colors. Easy to weed for all projects.

  Matte HTV Instruction for Hand Iron Application

• ●  Follow the first 3 steps above.

• ●  Set the iron dial between Cotton and Linen, depending on the item you are pressing.

• ●  Place on a flat hard surface (Iron board is not recommended).

• ●  To achieve the best application press, don’t use the iron steam function.

• ●  Place a cover sheet (Teflon paper or Parchment paper) over your design and press iron with firm pressure straight down for 30 to 60 seconds (depending on the design).

○ Tip: Don’t move iron side to side.

● Allow design to cool for a few seconds and cold peel application sheet in 1 pull for best results.

○ Tip: If design lifts up during the cold peel process, re-press the design area with a cover sheet for 10 seconds.

Material Recommendations for HTV Vinyl

• ●  All products should be polyester or cotton. Nylon materials will not work.

• ●  100% Polyester

• ●  100% Cotton

• ●  50% cotton / 50% polyester

  Care Instructions

• ●  For best care we suggest waiting 24 to 48 hours before washing your garment.

• ●  Suggest: turn the item inside out; wash in cold water.

• ●  Suggest: dry on a low setting, or hang dry for best care.

• ●  Suggest: do not use chlorine bleach.